swarovski jewelry set wholesale
5 thoughts on “swarovski jewelry set wholesale What are the code for CNC CNC programming? What does each representative mean?”
Leave a Comment
You must be logged in to post a comment.
swarovski jewelry set wholesale
You must be logged in to post a comment.
filigree jewelry supplies wholesale The code of CNC CNC programming is as follows:
G code is the instruction in the CNC program. It is generally called G instructions. The G code can be used to achieve fast positioning, adverse round interpolation, smoothing interpolation, interpolation of the middle point, radius programming, and jumping processing.
Code name-Function Brief
g00 ------ Quick Positioning
g01 ------- straight intersection
g02 ------ Shun Shun Clockwise direction of arc interpolation
g03 ------ A counterclockwise direction arc interpolation
g04 ------- time suspension
g05 -------- Interture
g06 ------ Pangal piper interpolation
g07 ------ Z sample curve interpolation
g08 ------- ---- Featured deceleration
g10 ------- Data settings
g16 ------ Polar coordinate programming
g17 ------ Machining xy plane
g18- -----加工XZ平面rnG19------加工YZ平面rnG20------英制尺寸(法兰克系统)rnG21-----公制尺寸(法兰克System)
g22 ------ radius size programming method
g220 ------------------------------------------------------------------------------------------------------------------------------ --- Use
g24 ------ Sub-program ending
g25 ------ jump processing
g26 -------------------------------------- ---------------------------- ng31 -------------------------- and other threaded thread cutting, British
g33 ------- and other thread-pitch cutting cutting , Public
g34 -------increase thread-to-thread cutting
g35 ------- Removal thread cutting
g40 ----------- ng41 ------ Sword compensation-Left
g42 --------right
g43 ------- Positive
g44 --------------- --- Turnover bias-negative
g45 --------------/
g46 ----------
g47 ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -The knife bias-/-
g48 --------/
g49 ------ Sword bias 0/
g50 ------- Bias 0/-
g51 ---------knife bias /0
g52 -------/0
g53 ------- straight offset shift , Logging out
g54 ------ Setting workpiece coordinates
g55 ------ Set workpiece coordinates 2
g56 ----- Set workpiece coordinates three
g57 ------ Set the workpiece coordinates 4
g58 ------ Set workpiece coordinates 5
g59 --------- Set the workpiece coordinates 6
g60 ------
g61 -------
g62 ------------ accurate path method (Coarse)
g63 ------ Entering thread
g68 -----------
g69 -------- outer corner
g70- ----- British-made size (This is Siemens, Frank's is G21)
g71 ------------------------------------------------------------ ng75 ------ Return to programming coordinates zero
g76 ------ The thread thread composite cycle
g80 ----------------- Round fixed cycle
g331 ----- Thread fixed cycle
g90 ------ Absolute size
g91 ----------
g92 ----------- prefabricated Coordinates
g93 -------- times countdown, feed rate
g94 --------per minute of feed
g95 ------ Turn into
g96 ------- constant line speed control
g97 ------ Cancellation of constant line speed control
Extension information:
instances
Example: Through the following example, the passing process of parameters in the sub -program call process, please note that
program name: P10
m03 S1000
g20 L200
m02
n200 G92 X50 r
g01 x40 F100
z97
g02 Z92 X50 I10 K0 F100
g01 Z-25 F100
g00 x60
z100
g24
The format uses
m03 S1000
n100 G20 L200
NN101 G20 L200
105 G20 L200
m02 nn200 G92 X50
g01 x40 nZ97
g022 Z92 X50 I10 K0 F100
G01 Z-25 F100
G00 X60
Z100
G24
g331
Format: G331 x______R__R_P __
R n (1) changes to diameter in diameter, x = 0 is a straight thread
(2) Z is the thread length, absolute or relative programming can
(3) The retreat length of the direction, ± value
(4 ) The diameter of the outer diameter of the R thread, the positive value
(5) KMM
(6) The number of cyclic processing of P thread, that is, cut a few knives
Tips:
1, each time the knife depth is r ÷ p, and the last knife does not enter the knife to light up the thread surface
2, the inner thread retreat tail determines the title I value according to the positive and negative direction of X.
3, the starting position of the thread processing cycle is to align the tip of the knife to the outer circle of the thread.
example:
m3
g4 F2
g0 x30 Z0
g331 Z-50 X0 I10 K2 R1.5
g0 Z0
m05 nCNC's main lathes mainly main It is a processing reverse exhibition parts. The model of the model is nothing more than outer cylindrical, outer cone, thread, arc surface, slot, etc. For example, the parts as shown in the figure are required, and it is more appropriate to use manual programming. Due to the difference in programming instruction code of the CNC system, programming should be held according to the configuration category.
Reference information Source: Baidu Encyclopedia-CNC programming
wholesale jewelry utah Hello CNC programming code a lot of practical and common common common common common common common common common positions
g01 linear cutting
g02 clockwise arc cutting
g03 counterclockwise arc cutting
g04 pause instructions (yes The system is delay)
g09 Correctly stop detection
g10 Correcting setting
g12 clockwise circular cutting
g13 counter -clockwise circular cutting
g15 polar seat system cancel
G16 pole seat setting
g17xy plane setting
g18xz plane setting
g19yz plane setting
g20 English -made unit settings
g21 public unit settings
g22 software limit Set
g23 software limit settings cancel
g27 mechanical origin reinstation detection
g28 automatically return to the original point through the middle point
g29 automatically returns from the reference point
g30 to the second original point
G40 knife radius correction cancellation
g41 tool radius correction
g42 knife radius right correction
g43 knife length along positive correction
g44 knife length along the negative correction
g49 knife tool Level correction cancellation
g45 knife position replenishment
g46 knife position reducing
g47 knife positioning to double increase
g48 knife position to decrease
g50 ratio function cancel off r r
G51 ratio function setting on
g52 replies to the basic seat label system
g53 Reply to the mechanical seat logo system
g54 first work seat coordinate system
g55 second work seat system
g56 The third device seat system
G57 Fourth Fourth Property Label System
G58 Fifth Profit System
G59 Sixth Profit Systems Cycle
g71 circular segmentation cycle
g72 line segmentation cycle
g73 high -speed beak diamond cycle
g74 Levotch cutting cycle G76 refined enamel cycle
g77 negative enamel cycle ng80 Fixed cycle cancellation
G81 drilling loop
g82 horn processing cycle
g83 peck drill cycle
g84 right rotation cutting cycle
g85 enamel cycle ng86 enamel cycle R nG87 enamel cycle
g88 enamel cycle
g89 enamel cycle
g90 absolute instruction seat label setting
g91 incremental instruction seat label value setting
g92 absolute program zero points Set
g94 Pour per minute, set MM/min r The NG95 is transferred to set the fixed cycle of MM/Rev
g98, and the knife is returned to the starting point. It will use reversal)
m05 The spindle stops
m06 knife exchange
m07 atomized coolant to open
m08 cooling solution to open
m09 coolant opening
m10 workbench (B Axis) Lock
m11 workbench (B axis) to release
m13 spindle rotate clockwise and cutting fluid
m14 main shaft rotation and cutting fluid nm15 positive direction motion r r r r
M16 negative direction movement
m19 spindle positioning
m30 program ending memory Return to M98 subroutine call M99 subroutine to cancel the above you understand that you really play a role and hope to help you!
shop wholesale jewelry Pay content for time limit to check for freenAnswer the code of CNC CNC programming and the meaning of their respective representatives as follows: G00 fast positioning G01 linear cutting G02 clockwise arc cutting G03 counterclockwise arc cutting G04 pause instruction (some system is delay) G09 correctly stop detection G10 correction G10 supplementary correction Set the G12 clockwise circular cutting G13 counterclockwise circular cutting G15 polar seat system to cancel the G16 polar seat setting G17XY plane setting G18XZ plane setting G19YZ plane setting G20 British unit setting G22 G22 setting G22 Software Extreme Settings G23 Software Extreme Settings Cancel G27 Mechanical Original Return Detection G28 Automatic Return to the Middle Point G29 automatically returns from the reference point to G30 to automatically return to the second original point G40 knife radius correction to cancel the G41 knife radius to correct G42 knife radius radius Right to correct the G43 tool length along the positive correction G44 knife length along the negative correction G49 tool length to correct the G45 knife position to increase the position correction of the G46 knife.
tennessee jewelry wholesale Auto means automatic. Usage: (Auto) int b; parentheses indicate that can save that B is an automatic integer variable, but the common int B is actually saved by Auto
viennois jewelry wholesale
n00:00 / 00: 2070% shortcut keys to describe space: Play / suspension of ESC: Exit full screen ↑: increased by 10% ↓: reduced volume decrease by 10% → 5 seconds of fast advances ←: Press a single fast retreat for 5 seconds to hold hold it up. Here you can drag no longer appear in the player settings to reopen the small window shortcut key description